MAHOOSIVE CLEAR OUT GOING ON..


Hi all

I'm having a major clear out of bits and pieces left over from two buggy strip downs and so far one build up. I've collected a fair bit of stuff over the last 3 or 4 years

There's a lot of it so this is a big list, hope this is OK..

I've listed everything with what I think is a fair price but no sensible offer will be refused..Prices don't included postage and cash on collection (from West London) preferred. I travel around a bit for work at times so could maybe meet people elsewhere at a convenient time..

If anyone wants to uses paypal its fine but will need to be as a gift or price adjusted to allow for fees. I could post most items with a budget courier like Hermes it won't be adding much to the cost.
Thanks for looking and here goes

Engine Parts

D Code Engine Case, may need a bore £75.00


Crankshaft that came out of the above engine case £25.00


Camshaft from the above £25.00

Conrods from the above £30.00


Pushrods and Tubes £20.00


Or all of the above as a job lot for £150.00

Twin Port Oil Cooler £30.00


200mm Flywheel £25.00


Sump bottom plate w/o drain plug £10


Oil filler and breather tube £10.00


Sump bottom plate with drain plug £10


Bottom Pulley £10.00


Or everything above including the first job lot for £225.00

Fuel System

A pair of Weber ITC 34 Carbs, in used condition and will need a clean/service £135.00



A set of CB Offset Manifolds to suit ICT 34 (or Empi EPC), these are brand new, not used, drilled and tapped for balance tube  £70 .00


Pair of single port manifolds to suite ICT 34 (or Empi EPC), these are used, drilled and tapped for a balance tube £25


Pancake Airfilter, rusty £5


Fuel Regulator with connectors £10 (leaking though, probably needs new gasket..


Two Hex Bars for twin carb linkages, one has side arms for fixing to Weber ICT £25.00 for both




Clutch Parts

Brand New 200mm Clutch Kit to suit early release arm, includes pressure plate, friction disc and bearing but not springs £40.00


A used 200mm Clutch pressure plate and friction disc, less than 500 miles in total £30.00


Early Style Clutch Release Arm £10.00


Tinware and associated bits

Heres a used black fanshroud that has been airbrushed. Has heater tubes but there are also some chrome stoppers. I also have the alternator backing plate £40


Heres an older style fan shroud with the flatter top and heater tubes painted in silver but could do with a tart up. No alternator plate with this one £25.00


Pair of painted rocker covers and retainers £25


Pair of chrome rocker covers and retainers £25


Some chrome cylinder top tins, should polish up nicely


Some chrome cylinder top tins painted silver £25.00


Some under cylinder cooling plates £15.00


A brand new front engine tin, damaged in transit by GSF but didn't use it anyway, couldn't make it fit. I bent it back in to shape £10.00


Fan Cover (no fixings) £5.00


Bottom Pulley Tin £5.00


Ignition

Distributors
I have 3 Original SVDA JFU4 Distributors. They have all come from running engines £20 each..




Coil, Make unknown, working £10.00


Bosh Blue Coil, working £15.00


Bosch Regulator (Used) £25


MGB Steering Column with Steering Wheel, still has keys in the ignition and all wiring/plugs £35.00


A set of NGK HT Leads, not sure what fitment £5


Miscellaneous

Beetle Starter Motor (not believe to work) £10.00


Beetle Indicators £10.00


Pair Front Lamps £15.00


Also have the flowing but no pics yet....

Pair of wolfrace slot alloys 4 * 130 pcd, 15 *7J   £50.00
pics to follow

Pair of wide 5 rear drums £40.00
pics to follow

I also have an AB Code Gearbox £150
Pics to follow

Front disc set up  £125
Pics to follow

I'm,  interested in the front disc bakes can you give me more details please. 

Can I have the new clutch please
Thanks

Quote from: Twitch247 on June 07, 2015, 06:45:02 PM
Can I have the new clutch please
Thanks

Ive Pm'd you Twitch

Quote from: crowey on June 07, 2015, 02:35:27 PM
I'm,  interested in the front disc bakes can you give me more details please. 

I will need to dig them out of the garage loft and take some pics. There are discs, calipers and arms.. Will need a clean up obviously..

Airbrushed fanshroud now sold

Soooo tempted to go retro with the sp manifolds but I'd need heads, tins and studs to make them work... ...

New early style clutch sold
Used late clutch sold
Clutch release arm sold
Hex bars sold

Flywheel sold

Could I take the slotmags for my mate Andy please Mike?
Would you be willing to courier them or do I need to arrange collection?
Cheers

Jim, where is your mate based?

Can I go for the under cylinder cooling plates, will want postage too, thanks

Quote from: Mikeohope on June 08, 2015, 08:46:22 PM
Jim, where is your mate based?

I'm down in South Devon, Andy is on the Isle of White.
My bro-in-law comes up to Thames Ditton and SE London every couple weeks
We're all meeting up at Bristol Volksfest in a couple weeks.
Sure we can figure something out 

I'm in Dartford Kent, most days so se London is doable.

Quote from: Mikeohope on June 08, 2015, 09:40:28 PM
I'm in Dartford Kent, most days so se London is doable.

Could you message me a contact number Mike?  I'll pass it on to Andy.
Cheers