Hi Jim,

Been away for a couple of days.

If you want the ones I have then they are yours - £5 donation to a charity of your choice. You could also get the ones of Hoge and then you could use the little connectors off one to fill in the gaps in the one I have if you know what I mean?

Looks like your stalks have the electric washer bottle switch built in as it has the extra pins on the back.
Chad

Quote from: HOGE on April 06, 2013, 02:27:14 PM
Hi JimB,
It looks to me that you need a large plug with 9 terminals and a small plug with 4 terminals.
I thought they were all the same for twin stalks!

Hi Hoge

By the looks of it there could be a lot of versions out there, i thought all the twin stalks were the same too !
But looking at the plugs you've pictured they'll fit ok, i just won't use that 5 terminal, i haven't got anything at the moment so something i can work with is better than zero.

Jim

Quote from: Chad on April 06, 2013, 03:45:28 PM
Hi Jim,

Been away for a couple of days.

If you want the ones I have then they are yours - £5 donation to a charity of your choice. You could also get the ones of Hoge and then you could use the little connectors off one to fill in the gaps in the one I have if you know what I mean?

Looks like your stalks have the electric washer bottle switch built in as it has the extra pins on the back.
Chad

Hi Chad,

Sounds like a plan, how do you want to go about sending and donating ?

Jim

Hi Jim,

Sent you a message. did you get it?

Chad

Quote from: Chad on April 09, 2013, 07:47:07 PM
Hi Jim,

Sent you a message. did you get it?

Chad

Chad,

No didn't get it chap.

jim

The connectors are the same...

Its just the pins on the stalk unit that differ ( and by differ, i mean in number, not position)

I need some two of these connectors for my build as well! Does anyone have any of them left?
Thanks
Jonny

Quote from: Chad on April 09, 2013, 07:47:07 PM
Hi Jim,

Sent you a message. did you get it?

Chad

Hi Chad,

Still didn`t get your message and still in need of some connectors, not able to get a hold of Hoge at the moment so i`m a wee bit stuck.
Have you still got some laying around ?

Jim

Hi Jim. Tried a couple of times - technology often beats me though

Email me your address direct to chad@chad.me.uk and I'll get them sorted

Im still after these connectors if anyone has any spare? Thanks

Quote from: Jonny on April 25, 2013, 11:15:27 PM
Im still after these connectors if anyone has any spare? Thanks

Hi Jonny,

Chad bailed me out with some last week but i believe Hoge might be able to help.

Jim.

HI jim,i pmd you earlier,sorry for not getting touch sooner buddy.
If your sorted now,Jonny can have these connectors...
cheers Hoge.