well its 2021 and i still struggle to walk from top to bottom of yard,!!so I REALY NEED TO GET STUFF SOLD!
FIBRE FAB Mk3 LWB TUBE FRAMED 1641 buggy,my own personal toy,THE BEST handling buggy ive owned.ive owned close to 270+buggys.bright orange(needs polishing/compounding)black factory hardtop(the 1 used to make the fibre fab moulds)this buggy was built by kingfisher kustoms back in the 80,s for an AA Mechanic.the tube frame is modular as you can remove the roll cage/upper half from the rolling chassis.no IVA worries as its been built pre sva/iva nonsense.tax exempt MOT exempt but i always used to get the local tester to give it a onceover every year.PRICE?? £4750 AS IT SITS.
FF Mk1 SWB SHELL, still in its original gel coat(no nasty reactions if you paint it)SHELL/BONNET/DASH,£320.
BOUNTY HUNTER bonnet,mouldeed in dash (currrently on fleabay for pictures),£90
AMERICAN MANX FIT BONNNET,no idea what model it is,its LHD (easy to convert to uk f it),£65
AXLES,ball joint german vgc with trailing arms/shocks,£100,ball joint german has been repaired bottom of shock tower,£50,kingpin bare axle beam £55
trailing arms,£20 each kingpin and ball joint.kingpin steering spindles/linkpin carriers £70,NEW ball joint disc stub axles,£60,calipers as new £70,used £20>30 each.5 bolt kingpin drums vgc £30,backplates mint with shoes/springs/cyls,£40 each.ball joint backplates £20 each,66/67 drums/backplates/spindles,£70pair.steering boxes £35.loads of tackrods with good ends.
loads of buggy sized tyres 155x15>295/50/15,14"16".road tread m+s tread.way too many to list.
WHEELS ,WELD 7X5 LIGHTWEIGHT dragster 5 spokes,£130,5x15 £100,6x14(1 bent needs straightening)£40,
AMERICAN RACING EQUIPMENT TORQUE D THRUSTS POLISHED ,7x15/6x15(slight ding in outer rim on 1 6x15)£360,chevy pcd
set 4 centreline polished copys,5.5x15/8x15 with tyres,£385,vw 130mm pcd.TONS AND TONS OF OTHER BUGGY BITS,steering wheels,etc
07855 542195 

What pedal parts do you have Pete? Interested in a job lot.

Hi Pete

Got any pics of the wheels? Particularly the American racing ones

Ta, Jim

need an e mail address for pictures e mail buggypete@aol.com

Would you have
Roll bar/cage
Rear engine frame
Alloy fuel tank
Small spline steering column
Ttfn Glenn

roll bar/cage?get 1 made ,thier should be plenty of talented metal manipulators in the glasgow area(racecar/stock car/etc)same for rear cage.alloy tanks are not much good in buggys as you cant see how much fuel is in it,go for a plastic tank or try agricultural sprayer /garden machinery suppliers as they often have plastic tanks that have all fittings and even guages built in at a fraction of american import prices.if i was getting a new tank i,d opt for a custom made alloy tank,.steering column? 1303 yes, others no they are getting very hard to find in good nick.

Cheers for the advice, the engineering heritage of Glasgow is mostly history now, never thought of an agri tank, will have to widen my search.
Thanks for your time
Ttfn Glenn

Quote from: 93fxdl on February 07, 2021, 03:29:13 PM
Cheers for the advice, the engineering heritage of Glasgow is mostly history now, never thought of an agri tank, will have to widen my search.
Thanks for your time
Ttfn Glenn

Ross Morrison at RMR Restorations will be able to make you a roll cage. He is located just outside of Bishopton. Try the West of Scotland VW forum to see if you can get a column.

Quote from: Scottishbugger on February 07, 2021, 08:56:18 PM

Quote from: 93fxdl on February 07, 2021, 03:29:13 PM
Cheers for the advice, the engineering heritage of Glasgow is mostly history now, never thought of an agri tank, will have to widen my search.
Thanks for your time
Ttfn Glenn

Ross Morrison at RMR Restorations will be able to make you a roll cage. He is located just outside of Bishopton. Try the West of Scotland VW forum to see if you can get a column.

Cheers for that, will probably end up making the cages myself, already a member of  the westies so will try them next, not in any great rush just collecting bits as they come along. Also buggy is somewhat on hold for to v5 issues
Ttfn Glenn

Hi Pete on the hunt for a front bumper

Hi Pete,
Do you still have the ball joint front beam RHD?, mine has rotted out???
many thanks,
Roman

Pete,

Looking for tin ware. Doghouse fan housing and cylinder tin . Plan to get powder coated .
What do you  have.
Best Paul

got tin ware,axle sold to hotrodder,that type of baja bumper i dont have but do have others.

Any chance you could send pics of bumpers you've got