To save me faffing around with different parts for my IRS conversion. Not too worried about condition - it's a sandrail.
7"-9"wide will apparently fit my 31x10.5 BF's 

Buggy Pete or is it Buggy Steve is the wheel man on here.

Is there some sort of summoning ritual for them 

buggypete@aol.com is is email addy on his member profile.

Thank,s I dropped him a PM
- he probably wont appreciate the email address in the open forum though as they are regularly trawled by the spam bots...

Quote from: fugglededumm on September 24, 2017, 03:17:46 PM
Thank,s I dropped him a PM
- he probably wont appreciate the email address in the open forum though as they are regularly trawled by the spam bots...

funnily enough Pete posted his address elsewhere today

Given up on this going to do it a different way!

right ive been rummagin and ive a pair of 7.5x15 slots on proper unilug,you,l have to sort out some appropreate washers,£120.or why dont you get hold of a pair of porsche spare wheels and swap the centres into a pair of steel rims,i use land rover wheels with vw centres.ive sold all my porsche splitrims,and prices have sky rocketed lately for anything porsche

Thanks Pete.
As couldn't find anything I'm going to make a template, and drill the steel ones I have to 5 x 130.  I have bought a pair of 5mm thick 5x130x71.6mm CB steel plates (designed as spacers) and I will use those as a backing plate on the outside of the wheel, with a bit of weld in the un-used wheel holes.  Should be stronger than the original and be hub-centric.