Wiper motor wires/ switch

Started by Aldo24, May 31, 2017, 07:55:16 AM

« previous - next »

Aldo24

**
Full Member
Posts: 54
Fibre fab rat
Location: Bradford
Hi I have wires brown black green black/grey black/ green I have a switch on back terminals L   h  p b  any help what goes were thanks al

snoopy

MBC Moderator
******
Buggy Expert
Posts: 11,175
Kango ss/ Jas lwb
Location: evesham. 07757010432
Only 4 terminals and letters must be an earlier beetle switch, the samba site will have a diagram.

5 wires brown is earth to the motor
Black is a live to the switch functions
Green will be a live for the self parking
Black grey and black green will be the speeds

Guessing you have an early switch and late loom which will work together but give you only single speed wipers.
You may need a later switch, how many terminals on the wiper motor.
Any photos avaiable.

Aldo24

**
Full Member
Posts: 54
Fibre fab rat
Location: Bradford
Hi the switch is not a vw switch after market but it is a wiper switch

snoopy

MBC Moderator
******
Buggy Expert
Posts: 11,175
Kango ss/ Jas lwb
Location: evesham. 07757010432
All you can doi is test the terminal outputsin off low and high speed then wire them tothe motor

Doon L001

Forum Moderator
******
Buggy Queen
Posts: 4,972
DOON LWB
Location: Nr Leek Staffordshire
Quote from: Aldo24 on May 31, 2017, 10:36:17 PM
Hi the switch is not a vw switch after market but it is a wiper switch

If there's any markings or numbers on the switch try googling them, you might be lucky
Dave - Doon LWB Name "Weather Permitting"
Poco Loco!

Pondlife

***
Buggy Obsessed
Posts: 392
SWB FFBuggy
Location: Darn saaaaaaf ....
This from the Samba.....   




worked for me.. ;-)up

Clueless.........

SMF spam blocked by CleanTalk