wanted
tilton pedal box like this

Quote from: Dave DND on September 15, 2021, 12:57:02 PM

I did however, come across a cheap set of 300Kg warehouse platform scales for £15 and bought a couple as I know you have to keep the car as level as poss and weigh both sides at the same time.

do you have a link for these

It can be done with two changes over relays and two indicator relays. Don't know about the American trailer relay. If you need a wiring  diagram let me know

https://www.machine7.com/product.php?xProd=11984&xSec=3454
and may be some heat

I have used them in other applications with good results, never done a carb

https://simplybearings.co.uk/shop/Bearings-Oil-Filled-Bronze-Bushes-Oil-Filled-Bronze-Plain-Bushes/c3_4511_4770/index.html
any good

255/60 15 any good two BF Goodrich comp TA

Quote from: 93fxdl on March 21, 2020, 03:36:46 PM
Just bought a project manta Ray with king and link front end and an L registration, it has two chassis numbers, the original and a riveted on one, log book says vw saloon and matches the riveted plate. The original chassis number leads to a k reg blue beach buggy currently on sorn. but I have no log book.
Just wondering if I should open this time of worms and apply for the log book

Interested how you traced a reg number from a chassis number?

Quote from: bedbug on March 26, 2018, 02:00:36 PM
Hi

Gentlemen Looking for one of these any ideas, I've drawn a blank so far



Jim

Can't help with a replacement but I'd be interested in having this one. Or if anyone else has damaged king pin spindles   

Quote from: Davince on September 21, 2015, 12:03:26 PM
Have the cannons gone?

Still here do you want them

QuoteParts boxes 13inch front to back 7inch high 8inch wide, 8 off unused but dirty from storage they are stackable and will lock together £30

I can get these posted £8

Quote from: buggypete on August 28, 2015, 12:58:09 PM
interested in the cannons and the ct tins.phone number?

Hi  Pete send me an email   mossbug  At  Hotmail . co . uk    I'll then send you a number
[/quote]

Hi Pete Haven't heard anything from you. anyone want the cannons before they go to the tip

Some more stuff
cantilever toolbox made by Kennedy and is the longer 22 inch type this has never been used  I have had it in storage for about 10 years £15

I also have a shorter 18 inch one in the same condition £10

Heavy rear quarter floor pan this is not the thin steel type £40



4 stud wheels tyres are old but they do hold air £8 for the two


Plastic parts boxes 9cm x30 x8 about 30 of these and 19cm x30 x 8 about 40 of these I also have some dividers for them £60

Quote from: muzzy01 on August 30, 2015, 02:05:56 PM
any more pics o those molds bud

Hi Muzzy its not a mould just the start of a plug email me mossbug AT Hotmail . co .uk and I'll send you some pic's when it stops raining 

Quote from: cunningstunt on August 30, 2015, 09:26:20 AM
Real shame, i want the bins and the rear cage but being in Norwich and the crap road links i don't think a 7 hour round trip is much fun Any way you could post them Steve??

I think the only way to post an engine cage would be on a pallet then the cost would not be worth it. Maybe Humpers and Dumpers could help you out