Hard top this is the start of a plug I was going to make for a long wheel base hard top it was going to be a 3 piece mould front middle and back. The front and back could be put together to make a short wheel base mould, anyway that was the plan. It's now up for grabs FREE to the first person that can collect it


Type 3 rear drums 4 stud this is a good upgrade for anyone wanting better rear brakes. I know they will bolt straight onto an IRS setup £50


Parts boxes 13inch front to back 7inch high 8inch wide, 8 off unused but dirty from storage they are stackable and will lock together £30


Cannons one front pipe on one is missing Free


CT engine tin in good condition £50


I will be listing more stuff later so please look in again Thanks

Engine cage £40

Interested in the type 3 rear brake set up. Which part of Birmingham are you at?

interested in the cannons and the ct tins.phone number?

Interested in the type 3 rear brake set up. Which part of Birmingham are you at?

Hi Steve  I'm in Kings Norton B30

interested in the cannons and the ct tins.phone number?

Hi  Pete send me an email   mossbug  At  Hotmail . co . uk    I'll then send you a number

Real shame, i want the bins and the rear cage but being in Norwich and the crap road links i don't think a 7 hour round trip is much fun Any way you could post them Steve??

Real shame, i want the bins and the rear cage but being in Norwich and the crap road links i don't think a 7 hour round trip is much fun Any way you could post them Steve??

I think the only way to post an engine cage would be on a pallet then the cost would not be worth it. Maybe Humpers and Dumpers could help you out 

any more pics o those molds bud

any more pics o those molds bud

Hi Muzzy its not a mould just the start of a plug email me mossbug AT Hotmail . co .uk and I'll send you some pic's when it stops raining 

Some more stuff
cantilever toolbox made by Kennedy and is the longer 22 inch type this has never been used  I have had it in storage for about 10 years £15

I also have a shorter 18 inch one in the same condition £10

Heavy rear quarter floor pan this is not the thin steel type £40



4 stud wheels tyres are old but they do hold air £8 for the two


Plastic parts boxes 9cm x30 x8 about 30 of these and 19cm x30 x 8 about 40 of these I also have some dividers for them £60

interested in the cannons and the ct tins.phone number?

Hi  Pete send me an email   mossbug  At  Hotmail . co . uk    I'll then send you a number
[/quote]

Hi Pete Haven't heard anything from you. anyone want the cannons before they go to the tip

Parts boxes 13inch front to back 7inch high 8inch wide, 8 off unused but dirty from storage they are stackable and will lock together £30

I can get these posted £8

Have the cannons gone?

Have the cannons gone?

Still here do you want them

 ;-)uphi have the exhaust if you still got them thanks.