A change in direction (V8..in my van that is!) means this is no longer required, can sell as Turbo FI setup, Long block and Tinware separate or all together. Engine spec is:

CB Super Race Rods
94mm B+P's
76mm Crank
Scat C35 Cam
Steve Tims Stage 1 Heads with Stage 2 stainless valves (42x37)
Dual Valve springs
1.25 CB Ratio Rockers

The engine was in my baja and was a cracking motor, currently it needs new pushrods (I threw away the old ones as I was going to reset the geometry after lowering the compression, it's at 7.5:1 now iirc), also, the top couple of threads on the number 3 plughole are slightly distorted, so will need cleaning up (almost all of the thread is fine, it is at the top only, i.e. the plug won't catch the thread properly).

Turbo FI set up is a new and never run CB Performance Hideaway System. It is 98% complete, currently has the wrong fuel rails. I have two turbos one I was going to use on the 2109 (Schwitzer S2a) and one bigger, more suited to a drag motor.

All of the tinware is powdercoated metallic dark grey, apart from the alternator backing plate.

Asking prices are:
2109 longblock - £2k
2019 built up, minus turbo FI stuff - £2.5k (includes MST alternator stand, serpentine set up, alternator, tinware and 009)
Turbo FI setup - £1.5k
Tinware - £150

Or the whole lot for £3.5k

Please note I won't sell the tinware separately until the longblock has sold.

There's a lot of ground to cover here, so if you're interested the best thing would be to give me a buzz on 07751111893. I work offshore so if I don't answer/respond within a day I'm probably playing with pirates somewhere, drop me a pm and I'll get back to you as soon as I can. I'm based in Stoke-on-Trent.

Also, full set of Turbo Vecs, 14's on the front (I think they're 6's) and 15's on the rear (8's..I think!), currently in BFG AT's all around, 195/75 on the front and 32x10.5 on the rear, includes all bolts, nuts, adaptors to fit them (chevy) to bug pattern. Tyres have lots of thread but are fairly old, rears have recently started losing air as the buggy has been sat for a while (doh  ) I think they may want resealing, I'm fairly certain they have no punctures. Looking for £300 for the whole lot. For pics, see here:

http://www.beachbuggy.info/index.php/topic,743.75/topicseen.html

May have to have me turbovecs back Baz 

Nearly cried when they left 

Ok if I look into a courier?

I just received payment for them Jim, sorry mate    

If it falls through I'll let you know.

No worries Baz, not really like I'm short of wheels 

Turbovecs SOLD, engine still available.