Hi, whilst I'm prepping the chassis, was wondering if it's better to run the front to rear brake line through the tunnel.

I did

and no problems in 20 years.

Chad

I did

and no problems in 20 years.

Chad

Interesting. How did you route the pipe Chad and how did you thread it through?

Cheers Chad

Hi Mark,

I did it when it was a bare chassis. I simply drilled a hole in the headstock and threaded the pipe through whilst looking down the tunnel through the front plate area.

Then a couple of cable ties where possible, a short piece of fuel pipe oround the brake line where it exists the chassis and all done

Chad

Hi Mark,

I did it when it was a bare chassis. I simply drilled a hole in the headstock and threaded the pipe through whilst looking down the tunnel through the front plate area.

Then a couple of cable ties where possible, a short piece of fuel pipe oround the brake line where it exists the chassis and all done

Chad

You make it sound so simple 

I will give that a go 

Hi Mark,

I did it when it was a bare chassis. I simply drilled a hole in the headstock and threaded the pipe through whilst looking down the tunnel through the front plate area.

Then a couple of cable ties where possible, a short piece of fuel pipe oround the brake line where it exists the chassis and all done

Chad

You make it sound so simple 

To be fair, I didn't say how long it took me