Hi everyone . I have a Classic ( Manx 2 ) body going spare as a painter .

Its in NATO green gelcoat , but has some streaks , and a few brush hairs in it . body , bonnet and dash . can do sidepods if you want them .

£900 . cheers , Rob 07789961904

Hi , I'll have the tyres if you're happy to courier them , or let me organise a courier ?

Not going to Stoneleigh .

Cheers , Rob

Thanks Ben !

Engine is now sold .

I bought back the 140 cu motor I sold first . rebuilding that now got 4carb heads , 4barrel inlet manifold , Ali flywheel , performance cam . sticking with standard rotation . should go well .

Cheers rob

Hi Gary , sent some pictures , did you get them ?

Thanks , Rob

Oops , sorry Dave .

£400 for the Corvair engine .
Cheers , Rob

Hi Everyone , I'm selling one of the Corvair engines i have .

Its a 1960/1961 , 140 cubic inch , 80 hp motor . I believe it was destined to go in a plane as the heads have been modified for twin spark plugs , I planned to blank one of the holes and run it as a normal single plug engine .
I was told it was rebuilt a few years back and never run . I have had one of the heads  off , and the barrels and pistons certainly look new , and I have had the cover off the top of the crank case and again it all looks new/rebuilt . I have pretty much everything to get it running , the carbs will need a rebuild , and the outside of the engine will need a clean .
This is the early , lower horse power engine , but still very torquey , and will sound great . You will need an adaptor kit to fit it to a VW gearbox , but they seem to be quite easy to get .

Any questions , give me a call , and I can email some poor quality photos if you want them . 07789961904 . Cheers , Rob

Hi , I have a 4 into 1 upswept header . It has a 3 bolt flange at the top , to take a stinger or muffler . I modified a single quiet pack to go on it , hung down to one side . Needs a clean and paint . £50

Cheers , Rob

Yes I do , £4 for postage ( for a pair , not each )

Paypal is robkilham@gmail.com

Thanks , Rob

Made a load of black pulley covers for a guy who let me down , can make different colours but only if its a colour I have in stock , as its too expensive to order colour just to make one .What color you want ? You could paint it ...

Matt , I made the bonnet about 3 years ago , again for a customer who let me down . I doubt the flake would match , as they seem to change all the time .
You know I'll do you a good deal if you want a kit .

Cheers , Rob

Hi everyone , having a bit of a clear out .

I have a pair of buggy low back seat buckets done in fuschia metalflake , and a pair in Western blue flake . £50 a pair . ( covers for these seats are £100 a pair )

Got a couple of Manx type bonnets with dash's too . One in Western blue flake , the other in a plain blue . $100 each .

black fibreglass pulley covers £15 each .

Cheers , Rob 07789961904

Quote from: Dave DND on September 26, 2015, 03:00:42 PM
How does the flow coat work then?

Does it polish up better than the gel coat?

Tougher finish?

Sorry Dave , don't get on here much . The flow coat is just like gelcoat , same toughness , its just that it dries in the air properly . So should be able to polish it easier .

Hi Dave , funnily enough , I've been experimenting with this lately .

I friend is building his Suzuki 125 as a bit of a cafe racer . he said he'd love the tank and rear faring in flake .

He had a spare tank , so I stripped the stickers of , rubbed it down and sprayed it with my metalflake gelcoat .

It came out quite lumpy , 3 days later its dry to the touch , but a bit dull .

Next step , flow coat ( I do the underside of my kits in black flow coat ) . Flow coat has wax added to it , the wax rises to the surface so that the gelcoat dries properly . I am planning to mix up some clear flow coat and spray it over the flake . It may make it a little more lumpy , but it should then be possible to flat it quite a lot , then polish it .

If It works , I could flake a buggy shell for say £300 -£350 , but leave the polishing to you !!.

I'll let you know how the tank turns out .

Rob

Hi , would you split the wide 5 drums ? After a pair of balljoint wide 5 fronts plus postage .

Thanks , Rob

Nice soft top , but who is the Suggs lookalike in the back round ?

Hi Everyone

I'm after a pair of knackered pre 67 seats , as I want to chop the runners of the bonnet to use on some buggy seats .

Cheers , Rob