Hard top this is the start of a plug I was going to make for a long wheel base hard top it was going to be a 3 piece mould front middle and back. The front and back could be put together to make a short wheel base mould, anyway that was the plan. It's now up for grabs FREE to the first person that can collect it
(http://images.yuku.com.s3.amazonaws.com/image/jpg/1ea6e5b5a9d64872b502e46a2b03ae5d.jpg)
Type 3 rear drums 4 stud this is a good upgrade for anyone wanting better rear brakes. I know they will bolt straight onto an IRS setup £50
(http://images.yuku.com/image/jpg/44c1db4491924f52a393c2c8a3fe63ef.jpg)
Parts boxes 13inch front to back 7inch high 8inch wide, 8 off unused but dirty from storage they are stackable and will lock together £30
(http://images.yuku.com/image/jpg/3705621634e344e7a74690187a6546d4.jpg)
Cannons one front pipe on one is missing Free
(http://images.yuku.com/image/jpg/a67bf0570a2a4dd68bc15a91d21b24f2.jpg)
CT engine tin in good condition £50
(http://images.yuku.com/image/jpg/11669a88254b48459257aff869a2d9b7.jpg)
I will be listing more stuff later so please look in again Thanks
Engine cage £40
(http://images.yuku.com/image/jpg/5eaa291f9202408e9d750848a2850094.jpg)
Interested in the type 3 rear brake set up. Which part of Birmingham are you at?
interested in the cannons and the ct tins.phone number?
Quote from: BuggySteve on August 27, 2015, 10:59:43 PM
Interested in the type 3 rear brake set up. Which part of Birmingham are you at?
Hi Steve I'm in Kings Norton B30
Quote from: buggypete on August 28, 2015, 12:58:09 PM
interested in the cannons and the ct tins.phone number?
Hi Pete send me an email mossbug At Hotmail . co . uk I'll then send you a number
Real shame, i want the bins and the rear cage but being in Norwich and the crap road links i don't think a 7 hour round trip is much fun :( Any way you could post them Steve??
Quote from: cunningstunt on August 30, 2015, 09:26:20 AM
Real shame, i want the bins and the rear cage but being in Norwich and the crap road links i don't think a 7 hour round trip is much fun :( Any way you could post them Steve??
I think the only way to post an engine cage would be on a pallet then the cost would not be worth it. Maybe Humpers and Dumpers could help you out
any more pics o those molds bud
Quote from: muzzy01 on August 30, 2015, 02:05:56 PM
any more pics o those molds bud
Hi Muzzy its not a mould just the start of a plug email me mossbug AT Hotmail . co .uk and I'll send you some pic's when it stops raining
Some more stuff
cantilever toolbox made by Kennedy and is the longer 22 inch type this has never been used I have had it in storage for about 10 years £15
(http://images.yuku.com/image/jpg/8f7feb82291d4cabaa40672769af531a.jpg)
I also have a shorter 18 inch one in the same condition £10
Heavy rear quarter floor pan this is not the thin steel type £40
(http://images.yuku.com/image/jpg/859b0f655cf841e0bb4dc2d33ec98ccc.jpg)
(http://images.yuku.com/image/jpg/9be371dce1964112b890cb341731c4a6.jpg)
4 stud wheels tyres are old but they do hold air £8 for the two
(http://images.yuku.com/image/jpg/86cba405b27344db948c7369ccc91e09.jpg)
Plastic parts boxes 9cm x30 x8 about 30 of these and 19cm x30 x 8 about 40 of these I also have some dividers for them £60
(http://images.yuku.com/image/jpg/14bb2e33f4b1405e863fc05dbc9114c0.jpg)
(http://images.yuku.com/image/jpg/cf597dedb6dd4e6c8e4bfff3a7e8d3fe.jpg)
Quote from: buggypete on August 28, 2015, 12:58:09 PM
interested in the cannons and the ct tins.phone number?
Hi Pete send me an email mossbug At Hotmail . co . uk I'll then send you a number
[/quote]
Hi Pete Haven't heard anything from you. anyone want the cannons before they go to the tip
QuoteParts boxes 13inch front to back 7inch high 8inch wide, 8 off unused but dirty from storage they are stackable and will lock together £30
(http://images.yuku.com/image/jpg/3705621634e344e7a74690187a6546d4.jpg)
I can get these posted £8
Have the cannons gone?
;-)uphi have the exhaust if you still got them thanks.