I've been looking for wheels for my being built custom buggy (on the forum BuzzWeld DoomBuggy) I wanted some curved deep dishes with big pepper pots, but restricted to 4 x 130 @ 15" there seem to be only modulars (which I will be happy with but I still wanted to see what else there is).
I found these online on an old German Ebay listing, according to the Cherman they're Mickey Thompsons, anyone know? or know of anything similar? They're tasty they only have 5 holes on the 15" ones, perfect.
(https://encrypted-tbn2.gstatic.com/images?q=tbn:ANd9GcSfzVw2d4PfIi_Rwp6cJYq9uCaLEK057-1_k0D1Txtknpg6SaWQHg)
Originally I wanted to see if there was any way some steel versions of the classic Lamborghini Bravos could be safely knocked up, wadya think? hhhhm I thought not.
(http://warnercnr.colostate.edu/~anderson/Technical2.jpg)
You could always go ror blank brake drums or discs and get them drilled to suit the wheels if possible or fit adaptors 4x 130 to whatever if a aiable.
those lambo wheels are wicked!
Quite fancy these myself: eBay item number:221708804230 but I'd have to convert from 5x205 and short on cash atm.
If you go to Chevy 5 stud wich are readily available it will give you a fantastic range of wheels to choose from ;-)up
Lambo pcd here
http://www.carlsalter.com/lamborghini-wheel-fitments.html
Ttfn Glenn
Thanks for the responses chaps, all good advice. If I could only identify/find those first wheels I put on the post though it would solve everything, they're ideal.
those steel wheels are weller,they were made in very limited number.may be unique.wheels like them were featured in a street machine magazine article(mid 80,s).
So I think then there'll be no chance of finding them. I am going to make some calls tomorrow to a few places who make custom CNC wheels from blanks, see if they can do the Bravos and how much, but I guess they'll ask silly money.
weller used to sell blank steel wheels,you can get them from custom and commercial in america.