Text only | Text with Images

Beach Buggy .Info

Trading Zone => Parts Wanted => Topic started by: Dave DND on February 07, 2015, 11:16:08 AM

Title: Wanted: Type 4 heat exchangers - preferably knackered
Post by: Dave DND on February 07, 2015, 11:16:08 AM
Looking for a set of type 4 square port heat exchangers to bastardise, cannibalise and chop into pieces to make an exhaust pattern before venturing out with shiny metal

Rougher the better - just as long as the section that bolts to the cylinder head is ok
Title: Re: Wanted: Type 4 heat exchangers - preferably knackered
Post by: Shaggy on February 07, 2015, 08:16:17 PM
You on about the 2ltr type that sit flat on a pressed metal gasket. Will check my shed tomorrow but I think all mine are oval port that use the copper gasket
Title: Re: Wanted: Type 4 heat exchangers - preferably knackered
Post by: Dave DND on February 08, 2015, 08:15:37 AM
You described what I am after perfectly   ;-)up
Title: Re: Wanted: Type 4 heat exchangers - preferably knackered
Post by: Shaggy on February 08, 2015, 08:58:29 AM
Had a look for you mate, sorry ....ya lucked out, all mine are oval port mate. I must have give the other ones away at some point.
Title: Re: Wanted: Type 4 heat exchangers - preferably knackered
Post by: Dave DND on February 08, 2015, 08:59:55 AM
No Worries - thanks for looking  ;)
Text only | Text with Images