What soft squidgy things do you put between them?
Personally I used standard door draught excluder
These guys are great for rubber trim, and have a nice catalogue that they will send you with some life size pictures of profiles in - really handy
http://www.woolies-trim.co.uk/
;-)up
Quote from: Hazel on July 16, 2013, 09:28:02 PM
What soft squidgy things do you put between them?
http://www.woolies-trim.co.uk/p-1797-rubber-extrusion.aspx
It looks loke this fitted, bridges the gap nicely. I may have a bit, I'll have a look in the shed later...
(http://i457.photobucket.com/albums/qq299/manxdavid/IMG-20130711-00197_zps890d1c8e.jpg)
Quote from: Roadrunner on July 16, 2013, 10:06:16 PM
Personally I used standard door draught excluder
;-)up
Quote from: Dave DND on July 16, 2013, 10:43:24 PM
These guys are great for rubber trim, and have a nice catalogue that they will send you with some life size pictures of profiles in - really handy
http://www.woolies-trim.co.uk/ (http://www.woolies-trim.co.uk/)
;-)up
I think this is, just what I was looking for :)
Quote from: Manxdavid on July 17, 2013, 06:38:18 AM
Quote from: Hazel on July 16, 2013, 09:28:02 PM
What soft squidgy things do you put between them?
http://www.woolies-trim.co.uk/p-1797-rubber-extrusion.aspx (http://www.woolies-trim.co.uk/p-1797-rubber-extrusion.aspx)
It looks loke this fitted, bridges the gap nicely. I may have a bit, I'll have a look in the shed later...
Would be great if you could find me some :) :)
I've got a length that might just about do it, 105cm-41 1/4", it's the exact length for my Jas. You're welcome to it if it'll do, there is a bit of stretch in it.
PM me your address.
Quote from: Manxdavid on July 17, 2013, 11:46:36 AM
I've got a length that might just about do it, 105cm-41 1/4", it's the exact length for my Jas. You're welcome to it if it'll do, there is a bit of stretch in it.
PM me your address.
That's about 5cm to short :(
There's probably that much stretch in it if you want to try it, maybe superglue either end to keep it there? It depends on what the section of your bottom chanel looks like. Mine has a groove for a rubber like this to slide in to.
Just a thought on something that the bonnets can do....
The area the screen sits down on can and does fall away from centre as it goes to each outside corner of the bonnet.
It a real pain, and may be useful to find what you need and make sure it has enough depth to accomodate
this falling away of the top/mounting face.
I had quite a bit of trouble sealing it when using the supplied Manx screen rubber extrusion, which quite frankly
is pretty hopeless if rain is involved... :)
Hazel,
Not sure if this neoprene profile is of any use, but I probably have an offcut leftover in the garage around the length you are after - let me know and I`ll dig it out for the weekend
(http://www.dndservices.co.uk/pics/Junk/Buggy/201317.jpg)
Woolies (in Market Deeping) will send you several free samples, just phone them and it arrives the next day, a very efficient firm to deal with. I've been using them for years!
Car Builder Solutions are worth a look, they do all sorts of trim bits.