Various bits n pieces. Prices were shown don't include shipping - NB Would much rather pass onto folks via Humpers/Dumpers if possible (see list at bottom of meets Im going to so can bring them with me) If desperate I can arrange shipping at cost.
A pair of 3 point harnesses, bought 2 years ago, in good nick, no obvious marks that I can see. Used in my buggy for about 700miles. (Cost new £70 for the pair.) £20 the pair
(http://i1135.photobucket.com/albums/m625/print465/buggy%20forum/IMG_2922_zpsbb88e706.jpg)
(http://i1135.photobucket.com/albums/m625/print465/buggy%20forum/IMG_2921_zps6ab85388.jpg)
Grant deep dish wheel. Classed as 9.5 inch I think. Also included (not shown) is the centre cap. (NB doesn't include the grant adapter) £10 SOLD TO DAN
(http://i1135.photobucket.com/albums/m625/print465/buggy%20forum/IMG_2918_zps588715f3.jpg)
(http://i1135.photobucket.com/albums/m625/print465/buggy%20forum/IMG_2920_zps1b8a29c2.jpg)
Acewell Fuel Sender. UNUSED. Bought from Dave DND (retails £35). £15 (First shout is for Hazel if she wants it)
(http://i1135.photobucket.com/albums/m625/print465/buggy%20forum/IMG_2915_zps3ead53d2.jpg)
Alternator/dynamo stand. £10
(http://i1135.photobucket.com/albums/m625/print465/buggy%20forum/IMG_2913_zps451b5708.jpg)
Dyno/alternator backing plate. £5
(http://i1135.photobucket.com/albums/m625/print465/buggy%20forum/IMG_2912_zps0b0a7515.jpg)
Savage switches: Hazard, side lights & Headlights. £5 for all 3 together. SOLD TO MUZZY
(http://i1135.photobucket.com/albums/m625/print465/buggy%20forum/IMG_2818_zps2bd3244a.jpg)
Dizzy cover and leads, used, leads just need a clean. Free to a good home "SOLD" TO MUZZY
(http://i1135.photobucket.com/albums/m625/print465/buggy%20forum/IMG_2817_zpsbb465f0d.jpg)
12V regulator for Dynamo. Taken out of buggy before rebuild. Was working fine then (but we know how unpredictable these are) Free to a good home
(http://i1135.photobucket.com/albums/m625/print465/buggy%20forum/IMG_2816_zps2273d14c.jpg)
Coil and Dynamo cover (have scratched terminal markings on dyno cover. Free to a good home of a chromosexual.
(http://i1135.photobucket.com/albums/m625/print465/buggy%20forum/IMG_2814_zpse6245ca3.jpg)
NEW / UNUSED bought from Flatlands. "Stainless Steel Adjustable Adapter Neck For Use With Monza Style Petrol Caps" AND "Top Quality Chrome Monza Flip Top Cap. Best Available" (Cost for both from flatlands £115) £50 for both
(http://i1135.photobucket.com/albums/m625/print465/buggy%20forum/IMG_2813_zpsca191926.jpg)
(http://i1135.photobucket.com/albums/m625/print465/buggy%20forum/IMG_2812_zps85ef7562.jpg)
Wide 5 to Chevy/jag 5 wheel adapters. Bought 2nd hand from Mark at Flatlands, not used myself (i bought new ones in the end). Threads all sound, yes there is surface rust/paint peeling off but still very useable, just need cleaning up etc. Also included 15 (yes 15 not 20, sorry) nuts for the wheels (7/16ths fit I think) I paid Mark £40 for the adapters, so nuts and adaptors for £20 ok?
(http://i1135.photobucket.com/albums/m625/print465/buggy%20forum/IMG_2811_zpsea2564cd.jpg)
(http://i1135.photobucket.com/albums/m625/print465/buggy%20forum/IMG_2810_zps23b8ebc1.jpg)
As I said, would rather not post these out, but can take to:
Mike's BBQ next weekend
NEWS, SWANAGE, SDBC North/South meets (or may be on route to Doncaster or Skegness)
8)Can I have the switches and leads dizzy cover please m8
I will have the grant wheel please bud !
Cheers Guys.
Muzzy you're there next weekend right?
Dan if you aren't there am sure there will be some one who could pass it on for you?
I'm there m8
Hi Mate, can I have 2nd dibs on the sender if Hazel is a no go.
Cheers H
No rush bud. Keep it till NEWS if that's ok ?
Can I have the regulator please? The one in CAMO is fried ::)
Cheers Steve
I'll have the adapters if you know of anyone coming 'oop North' in the near future... ;-)up
Sure Steve and David. ;-)up
Andy, can I have the coil and dynamo covers please?
Can give to Muz at Mike's if poss
Will do you old chromo you!
Hi Andy, can I have first dibs on the filler cap?
Just need to check its big enough to cover the hole in my bonnet from the existing one ;-)up
Sorry to be a pain but if you can give me a width of it I can check first ;-)up Thanks
Hi Andy
If they are still available can I take the pair of 3 point harness.
Should be going to Mike shin dig if that works for you.
Cheers
Mark
Kenny, no worries will check it for you and yes Mark, sounds just fine to me.
Andy If hazel doesnt want the fuel sender could i have it please. Got a acewell all in 1 but not wired up to my fuel tank haha. for measurement i use a stick haha.
cheers
aiden
ahh see 3rd dibs haha no worries. haha
Hi mate, can I have the filler cap and neck please if Kenny doesn't have it?
Yes please to the sender ;-)up and I would have had those harnesses if we hadn't just put seat belts in! ::)
Quote from: Hazel on June 16, 2013, 11:56:37 PM
Yes please to the sender ;-)up and I would have had those harnesses if we hadn't just put seat belts in! ::)
Hazel, just to clarify, you have this freebie coming to you that I have which Dave made up as a prototype did with.
(http://i1135.photobucket.com/albums/m625/print465/buggy%20forum/IMG_2914_zps0b185c28.jpg)
Plus buying the uncut version I also have (as seen above)?
Make sense?
Yes, makes sense. Can I have both please ;D Got more than 1 project remember ;)
Also, second dibs on the steering wheels - but I have no chance of that anyway but just in case ;D
Hi Andy, was thinking if you're going to the SDBC meet in a couple of weeks and not in a rush to get rid of the filler I can have a look at it then if you don't mind taking it? ;-)up
Hi guys,
Distributed some of the bits yesterday,
Ben - muzzy has your shiny bits
Dan- muzzy has your wheel, thought if he gives the chrome to Ben, Ben would pass the wheel on too?
Hazel - Dave dream has both senders to pass on.
Hope that's ok, hazel/ dan, settle up at News if you want.
Testa- still have you belts, just let me know if you are about at next meet or can see about posting them?
Cheers Andy
Any news on the filler cap please Andy? ??? ;-)up
Hi Andy
Didn't get up to Mike's due to poor weather here and putting a box in the bus as well as finishing the new engine off. Glad to be at work tomorrow for a rest.
I am no rush for them, most likely going to sort them out over the winter. Do you want me to paypal you the cash or at the next meet. NEWS, Swanage ........
Cheers bud
Testa
Quote from: kenny h on June 23, 2013, 03:57:01 PM
Any news on the filler cap please Andy? ??? ;-)up
Sorry Kenny, yes the filler neck is the standard 50mm diameter, but the filler cap once fitted would conceal an opening in your bonnet of less than 95mm.
Whether its vented or not, can't 100% say for sure. Certainly the centre seal inside is spring loaded so in the event of pressure in the tank, it would escape. Whether there is provision of air to vent into the tank, I m not sure. Does anyone else who have had a flatlands filler know? Anyway, will pass it onto Hunter who will be at the next SdBC south meet (I may not be) and you can see it then, and if you want it, great, if not he can get it back to me. Cheers Andy
Thanks Andy that sounds like hopefully it will be ok size wise ;-)up
I'll give it a try and hopefully it will be good to go then i can sort you out payment, maybe someone will be along to let us know about the venting into the tank worse ways I can just ring flatlands if it isn't I can just drill and make something up off the filler neck at work ;-)up
Hi Kenny, have passed the filler onto hunter to pass to you at the next SDBC meet, as I doubt I will be there then. He also did some highly scientific tests on it and it does indeed appear to be vented.
;-)up ;-)up ;-)up
Thanks Andy he did ring me to say he had it ;-)up
Let me guess he screwed it together put it in his mouth and sucked ::) ;D ;D
Quote from: kenny h on June 25, 2013, 07:07:53 PM
Thanks Andy he did ring me to say he had it ;-)up
Let me guess he screwed it together put it in his mouth and sucked ::) ;D ;D
Far more scientific than that..... He blew as well!!
;D ;D ;D I knew it would be technical! ;D ;D ;D
Quote from: AndyRobinson on June 23, 2013, 12:49:20 PM
Hazel - Dave dream has both senders to pass on.
Hope that's ok, hazel/ dan, settle up at News if you want.
Thank you Andy :)
Got the filler cap off H last night, didn't have time to fiddle about to see if it fits ok but i'm sure it will be fine besides it's shiny :D ;-)up
How would you like the money I can give it to you next time I see you? ;-)up
Are you doing Paddle?
Though certainly not 100% sure whether I am or not yet.... BUT If you are and IF I am... could do then. If not paypal or whatever... Sort it out after the weekend. ;-)up
Yes i'm planning on going down on the Sunday, but as usual depends on weather plus whether the buggies running again after last night :-\ ::)
Either way we'll sort it out ;-)up