Probably a odd question please bear with me ;D
Floors are good in my chassis apart from the front corners, where they meet the Napoleon's hat on outer edge ( Had new floors but never painted and fastened to a rusty Napoleon's hat then sat. I've cleaned up the end and floor and now the new Napoleon's hat fits in place now ready to be welded ::)
My new Napoleon's hat is for a left hand drive car but actually fits well the wrong way, If its sat in the right place i cant see any reason not to just fit it that way and save re drilling the master cylinder holes or am i being thick?
Obviously there's the bit that fits under the outer extremity where the body bolts but its not in the best shape there anyway so be easy to make a plate to bridge the tiny gap :D
(https://scontent-lhr8-1.xx.fbcdn.net/v/t39.30808-6/549423703_10166027975452926_3580817099483821647_n.jpg?stp=cp6_dst-jpg_tt6&_nc_cat=111&ccb=1-7&_nc_sid=f727a1&_nc_ohc=GqVrBqu_Vo4Q7kNvwG3uIdN&_nc_oc=Adn-ojgmBHyD6v1QqSEduF-3MouaDFWlHbdfUF59SRpCksVt357ndXAEozoWmkaBPMw1SZ_hI10fMshmYWJ2fIiv&_nc_zt=23&_nc_ht=scontent-lhr8-1.xx&_nc_gid=u_3t13VQaYcjEmIBmWEBIQ&oh=00_AfapAdlXeKucCGzsRrgSexh04rS1tArjfveLof2kJgG-Cg&oe=68D23D8D)
This was as i was messing with it and cleaning tunnel up so not in final lowest position, Didn't take any measurements as old one was plated to absolute death so need to find measurements now or wait till a body arrives
Best pop the pedal set into position to see if the holes line up with the pedals.
Will don :D