Just playing with various ride height options and wondering if anyone from the Muddy Side has any Raised spindles that they care to part with?
???
You mean trekker spindle's
No, Trekker spindles have the lower joint upside down and as I cannot flip the lower arms, I am looking for balljoint raised spindles
Nathan Baker makes them from 2 sets of spindles, he charges just over £200 I believe.
Quite a few of the baja boys have them fitted as Trekker ones are hard to get hold of these days
Quote from: BuggySteve on August 06, 2021, 06:42:01 AM
Nathan Baker makes them from 2 sets of spindles, he charges just over £200 I believe.
Quite a few of the baja boys have them fitted as Trekker ones are hard to get hold of these days
Cheers for that - Funnily enough, just been down to see him ;-)up
Insurance companies and more so MOT Can pick on weld spindles as they are not a welding suspension part So can not be weld.. I had it with Porsche to bay years ago I bolted and deep weld them and tested them But my Mot guy who is fair was like No way.. So I went to a different mot place and it past..
Quote from: IDA on August 06, 2021, 03:53:58 PM
Insurance companies and more so MOT Can pick on weld spindles as they are not a welding suspension part So can not be weld.. I had it with Porsche to bay years ago I bolted and deep weld them and tested them But my Mot guy who is fair was like No way.. So I went to a different mot place and it past..
Nathan has certainly advised me that 99% of the spindles out there should not be welded, but there are some versions where they are strong enough to do so. Must also be carried out by a competent and "Coded" welder too
;-)up