Hi all.Friend of mine has problems with his engine so engines got to come out so I can see what's going on with the heads,think they may be cracked.Thing is it's got way to much end float.So can I get away with just reshimming or have I got to rebuild the bottom end to cure the end float problem.No nasty knocks or rattles from the bottom end.
Cheers
Roy
You can't shim out excess endfloat, it is set when built and when it develops on an older engine 9 times out of 10 it's the flywheel end main bearing moving in the case. If the case is otherwise good it'll need a line bore and o/s bearings.
As said thrust is worn on the case so machine thinner and fit oversize main bearings with a thicker thrust face, also worth getting the crank checked as that may need a regrind.
Thanks for that info guys.I thought that would be the case somehow.Guess I will have to strip it right down and see what wants doing.Might pay to get a recon short motor from somewhere reputable.
Farmer Rob on here.
I thought about farmer rob.Hes probably a fit far from us as we are on the south coast.Will pass his name onto my mate Ray.Might be able to courier the engines back and forth
Quote from: hustler on June 07, 2020, 11:33:42 AM
I thought about farmer rob.Hes probably a fit far from us as we are on the south coast.
Its worth the trip Roy, I have been to see him a fair few times from South Devon - Nice bloke and what he doesn`t know about engines . . . . ;)
I travelled from Cumbria for my engine from Rob ;-)up
Popped down to Rob's yesterday to pick up my engine.
Thanks guys.Will pass all this on to my friend Ray and see what he wants to do.I know what I would do,go to someone who has good feedback.Heard nasty stories about some other engine rebuild places
Rob is straight as a die ;-)up
Quote from: hustler on June 07, 2020, 11:33:42 AM
I thought about farmer rob.Hes probably a fit far from us as we are on the south coast.Will pass his name onto my mate Ray.Might be able to courier the engines back and forth
You can try Ollie at Beetle Magic in Dorset
1 Station Road
Dorchester,
Dorset
DT2 8AZ
01305 852338
www.beetlemagic.co.uk (http://www.beetlemagic.co.uk)
So,removed my mates engine as he was having bad misfire symptoms.Turns out it had a cracked head on number 4 cylinder.Also 2.7mm of crankshaft endfloat.Little bit to much me thinks.Managed to bag himself a 1641 camper engine today with Weber progressive carb,electronic ignition,new clutch,sports exhaust for not much money.Next job clean it up cos it's been standing a while,clean carb and see if she fires up.Fingers crossed he's back on the road by end of week.
whereabouts is farmer rob in the country
Farmer rob is basically near Northampton
PM him. It's worth a trip or call 👍