Got a bit of a bottom end issue on mine, so looking for another engine to play about with.

It must be a Type 25 Aircooled 2000cc CU engine with the flat / rectangular exhaust ports.

If its a good runner, then I`ll use it as a replacement, and if its a dead one, then I`ll use it for a rebuild to replace mine

Anything considered really from Short/Long block to complete turn key lump

Hi Dave, I'm sorry to hear that you have got more problems with your buggy, the bottom ends on these engines are so strong and very rarely give problems. The only thing that usually lets them down is a dropped valve seat  Did you tighten the flywheel up properly?

I have got a half re-built CU code 2.0L engine sat in my garage. I got as far as putting the B+P's on it and shimming the flywheel, dizzy drive is in and fan drive is on. £275 if it is any good to you 

Cheers Rob

YES PLEASE 

Consider that one well and truly sold