Any 15 inch,4 stud wolfrace slots about.

 

Join the queue my friend   

Plop,don't say that they're the only ones i like. I bought a pair the weekend so only need another. I see you have one on ebay,too wide for the front,maybe split in in half.

They do come up, but not often -

The 5 stud Chevy/Jag ones are easier to find, and you can just use adaptors to make them fit   

I've got about 8 or 10 4x130 x 15 but nothing wide enough to use on the rear. The skinny ones with the band/circle on them are fuggly too imho.

The skinny ones with the band/circle on them are fuggly too imho.

They were the 6x15s that they made mainly for XJ6 Jags. 7x15s have a smaller ridge and aren't too bad.

I recon 6x14 or 7x14s are the nicest looking for fronts.

http://www.volkszone.com/VZi/showthread.php?t=1414521

Flags,i have rears tiz fronts I'm after. You interested in selling any

Thanks mr. Pondlife. Thats the little beautys,just sold though. Could do with 80 hour days to get it all done,work,diy,bookwork or 2 lives running side by side.

I'll try to get to the pile this weekend but the best 4 are ear marked for the CanAm if I ever get time.

They all need work though as they have been painted in the past and been standing for years.

Wedone Flags,i only need 1 pair for the front. Nothing is ever easy for me,but manual lobour is free,not a problem. No hastle would be uncharted ground,out of my comfort zone. Can am is that a trike with 2 wheels at the front,cool seen one in spain,dead jealous.

Flags,if you had any good luck for me I'm not ignoring you,I'm a bit off grid this coming week. I can scoot down your way of an evening by about 7.30, my van can drive itself to kimmeridge, i used to dive out of there alot. I think you live around thate area somewhere. (Don't pass um on to dnd). Cheers.

(Don't pass um on to dnd). Cheers.

No worries mate, what you are after is too small for my collection - I`m after wide ones 

Mr.Flags,any joy in your garage? I've  spent 8 and a half hours with a plywood splinter in the end of my finger polishing the pair i have. Another 3 to go i recon to get the scotch pad scratches out. Can't wait to do the next pair,I'm on a roll.

Sory mate I've not had a chance to get over to where they are but will try my hardest tomorrow if I can get out of work on time.