Hi,
I am in the process of starting my wiring. I have a twin stalk (one indicator and the other window spray and head lights) steering column.

I need the female connector switches/plugs which will go on to the male connectors of the ignition and the stalks.

I've spoken to a couple of people and they have said I need a second part as you can't  get these new.

I'd be extremely grateful if anyone could help me out with this, has any for sale, or is in a good mood and would like to donate them for free LOL.

Cheers Lee

Only places I can think off you can try is volksmagic in oldbury Birmingham or kingfisher kustoms Birmingham do a search in recommended suppliers for contact details or Google their web sites

Lee I may have some squirelled away somewhere. Let me take a look when I get home.

Chad

I think I have what you need but there may be more than one type so to double check, what I have has two blocks that connect on to the pins on the underneath of the steering column. One block has 5 pins with the other having 9 pins.

On the 5 pin block there is one pair that are top and bottom with the other three being single hight side by side.

On the 9 pin block there are three pairs that are that are top and bottom followed by three more that are single hight side by side.



£10 posted. Let me know if any good.

Carlos

Thanks for the replies. The connectors are all in a straight line. there is 4 on one and 6 on another.

[6 Pots...stuff your bhp, torque is king]

That picture Carlos has put up is the correct part.

Youll just need a wiring diagram to figure out the pin outs. Not hard, just match the colours. Give me a shout if you need any help. Running a twin stalk on mine.I also converted the screen washer function to electric. Using a small push switch in place of the air pressure stuff. Some pics in my buggy build thread.

Thanks Ben for the offer and Carlos - I'll take that connector off your hands I'll PM you.

I'm trying to upload an image of the rear of my stalks to show the male connectors. I just keep getting . PM

[6 Pots...stuff your bhp, torque is king]

On the picture Carlos has put up, the two flat edges of the connectors sit against each other. When they are doing that, it will match the pin config of your wiper stalk.

This diagram shows where the different wires go.

http://www.thesamba.com/vw/archives/info/wiring/bug_std_super_72.jpg