Just looked at your pics... one shows a cage ?  Do you have one fitted???

Just looked at your pics... one shows a cage ?  Do you have one fitted???

Hi krung its yourfault as I do have a tendency to ocd andsaw your exhaust    the cage and bars that were on it are ok but a bit heath Robinson  so having them made in shiney stuff  rear cage im having made is  a simlar  to manxter style and hope not to hide exhaust ? ! Hope to have them by end of month

Hi Clem whats your set up on the front to get it that low.

adjustable front beam that was on it welded in low so dose not raise much and ball joints at to much angle? So might raise it and put some drop spindles on to take out the ball joint angles ?

Hi Clem whats your set up on the front to get it that low.

adjustable front beam that was on it welded in low so dose not raise much and ball joints at to much angle? So might raise it and put some drop spindles on to take out the ball joint angles ?

a good idea it will handle better with the dropped spindles but you can get long travel ball joints.

Hi Clem whats your set up on the front to get it that low.

adjustable front beam that was on it welded in low so dose not raise much and ball joints at to much angle? So might raise it and put some drop spindles on to take out the ball joint angles ?

a good idea it will handle better with the dropped spindles but you can get long travel ball joints.

ive seen the ball joints but figured would be better to go drop spindle route ??

sun was out briefley today so washed my van (black van and ocd not good  )then pushed the buggy out to time it up with timing light not done this on a motor for about 20 years   was bang on from static setting when installing new dizzy just went over every thing cheeking for lose nuts ect gear box front mount needed thightening as is a crap red polly job so will order a rino one as this seems to go loose often ? still waiting on stainless bars to be finished but with this weather im in no rush  but i want to get out in my buggy 

love it mate

That's a gorgeous buggy Big Clem

well got my stainless bits done martin has done a top job not had any time to work on it so will get it all back together at week end and hopefully get my fist drive of the year tried som thing a bit diffrent with rear cage so not to hide mikes top work

That's shiney!!!

very nice stainless work and exhaust but I can,t do with the massive overhang they create. each to there own . 

clem looks the nuts dude top job

Very nice you'll have fun keeping that clean , just out of interest what size are the back tyres

Keeping it clean... with OCD thats the point... it is fun to keep it clean 

Looking good.....

Just from experience and hard to tell due to the angles of the pics... is the end of the exhaust pointing slightly up?  If it is (and my one did at first) I was stunned how good they are at collecting rain and condensation.   Kicked all sorts of wet crap out untill I turned it slightly down and its much better now.

I did notice the tailpipe pointing up, it was built to point down slightly