Welcome, Guest. Please login or register.
February 28, 2021, 06:53:56 PM

Show Posts - Speedy

Welcome to Beach Buggy .Info - The UK's Online Beach Buggy Community.

Show Posts

You can view here all posts made by this member. Note that you can only see posts made in areas to which you currently have access.


Topics - Speedy

Pages: [1]
1
Beach Buggy Rolling Chassis Help / Shock absorbers
« on: August 18, 2020, 11:55:18 AM »
From your experiences can anyone suggest a good quality shock absorber for front and rear of buggy obviously not to stiff on the front I'm guessing standard for the front thanks in advance  ;-)up

2
Beach Buggy Body and Chassis Help / Manx steering column
« on: July 06, 2020, 08:47:27 PM »
I hope some of you Manx owners who bought from Flatlands can answer this question. I Bought the steering column bracket and brace bar from Mark at flatlands way back and never really thought where the cross brace bolts in I've looked and am I right in thinking it bolts into the bonnet underneath where the windscreen rubber sits then you cut an hole in the dash to accommodate the tube for column if that makes sense  :-\

3
Beach Buggy Rolling Chassis Help / Wheel size
« on: June 22, 2020, 10:08:54 PM »
What would be the maximum wheel size front and rear on a Manx body shell thanks in advance Matt

4
Beach Buggy Body and Chassis Help / Pan gasket
« on: June 21, 2020, 12:11:24 PM »
Not really thought to much about this but do you fit a pan gasket when bolting down the buggy body  :-\

5
Beach Buggy Rolling Chassis Help / Steer box rebuild
« on: December 12, 2015, 09:33:35 AM »
NEW STEERING BOX. OR. REBUILD
Anyone know if you can still get rebuild kits for steering box, I've looked but can't seem to find rebuild kits.
Don't know if I can get  individual parts to rebuild ?  ;)

6
Beach Buggy Body and Chassis Help / Etch priming
« on: March 08, 2014, 07:03:33 AM »
Having got the chassis sand blasted, noticed on the rear frame and torsion tube housings some rust blemish spots coming through which I was sort of expecting.
If I put rust inhibitor all over this area and then etch prime has anyone any ideas as to what will happen, don't know if the etch will bite in or will it effect the inhibitor  :-\. I know really the etch should go straight onto bare metal, anyone done this before any, ideas would be appreciated.

7
Parts Wanted / 4x130 standard steels
« on: January 04, 2014, 09:34:16 AM »
Hi I am looking for 4 standard beetle 4x130 steel wheels, tyres not needed condition not to important , thanks

8
Members Buggies / Start of wifeys buggy - Manx
« on: December 10, 2013, 10:16:04 PM »
Stripped car down to this in two days, bit more rot than I thought. :-\

9
Newbie Welcome Area / New to the buggy world
« on: December 08, 2013, 11:44:33 PM »
Just started building a buggy for my wife, used to be into beetles and type 3s over 25 yrs ago will try and post as much of build as i can. :)

Pages: [1]