Welcome, Guest. Please login or register.
February 25, 2021, 12:46:24 PM

Show Posts - hustler

Welcome to Beach Buggy .Info - The UK's Online Beach Buggy Community.

Show Posts

You can view here all posts made by this member. Note that you can only see posts made in areas to which you currently have access.


Topics - hustler

Pages: [1] 2 3
1
Parts Wanted / Wanted 1641 barrel
« on: September 10, 2020, 08:09:49 PM »
Just a long shot.Would anyone have a decent 1641 barrel they want to part with.Dropped one of mine today and it took a chip out of the skirt.Luckily they weren't brand new but were perfectly useable.
Cheers
Roy

2
Beach Buggy Engine and Exhaust Help / Head spacer
« on: August 25, 2020, 01:35:37 PM »
Hi all,just stripped a 1600tp and between the cylinder heads and barrels were thick spacers.What are these for,never come across them before.
Cheers

3
Parts Wanted / Wanted.1600 engine
« on: August 19, 2020, 07:12:13 PM »
Wanted 1600tp engine in good nick preferably

4
Beach Buggy Engine and Exhaust Help / Camshaft query
« on: August 09, 2020, 09:39:12 AM »
Are flat or dished camshaft interchangeable as long as you have the correct oil pump.Ive been given a stripped Mexican engine with a flat and dished camshaft just wondering which to use.Cheers.
Roy

5
Beach Buggy Engine and Exhaust Help / Crankshaft pulley oil leak
« on: August 01, 2020, 07:58:43 AM »
Hi all.What could cause an oil leak from the crankshaft pulley as there is no oil seal.Could there be to much pressure in crankcase?we have got a pipe from oil filler neck to air filter.Any help much appreciated.

6
Beach Buggy Engine and Exhaust Help / Gland nut replacement
« on: July 22, 2020, 09:50:56 PM »
When replacing a flywheel is it always best to use a new gland nut or can old one be reused.Thought I read somewhere it's best to renew it.
Roy

7
Beach Buggy Engine and Exhaust Help / Bottom pulley bolt
« on: July 15, 2020, 10:55:31 AM »
Hi all.Anyone had a problem with crankshaft pulley bolt coming loose and dropping out.Its happened to my mate twice now.Both times it got put back and torqued correctly.Avnt put locktite on the thread yet so that's next step.Never heard of this happening before.
Roy

8
Beach Buggy Engine and Exhaust Help / Weber 32/36 prob
« on: June 28, 2020, 08:38:40 PM »
Hi all,friend of mines got Weber 32/36 on his 1641tp runs ok but occasionally the revs won't die off straight away and it over revs when accelerator is released.Cables not fouling anywhere and throttle arm returns to its stop with no probs.Any advice appreciated

9
Beach Buggy Body and Chassis Help / Gear rod support
« on: June 18, 2020, 10:26:54 AM »
Hi all.Has anybody fitted one of these

Cheers
Roy

10
Beach Buggy Electrical Help / Dynamo to alternator
« on: June 14, 2020, 02:17:22 PM »
Hi all.My mate has just acquired another engine for his buggy.Its a 1641 camper engine with a Weber progressive carb etc.It comes with an alternator which he would like to keep.How do we swap wires around from his dynamo to work with the alternator.Also engine comes with electronic ignition.A red and a black wire comes from the dissy do they both go to the coil.Thanks in advance.
Roy

11
Beach Buggy General Help / To buy or not to buy
« on: June 10, 2020, 06:44:51 PM »
Sorry about this I know it's been covered a billion times but can't find the thread.A friend of mine has seen a lwb buggy for sale,v5 states beetle saloon.Best to leave this alone or is it relatively easyish to get v5 altered to convertible.
Cheers
Roy

12
Beach Buggy Engine and Exhaust Help / End float
« on: June 06, 2020, 07:12:42 PM »
Hi all.Friend of mine has problems with his engine so engines got to come out so I can see what's going on with the heads,think they may be cracked.Thing is it's got way to much end float.So can I get away with just reshimming or have I got to rebuild the bottom end to cure the end float problem.No nasty knocks or rattles from the bottom end.
Cheers
Roy

13
Beach Buggy Engine and Exhaust Help / Carb probs
« on: July 29, 2019, 06:45:22 PM »
Hi all,running twin 34 ict carbs on my 1600tp.F6 emulsion tubes,135 mains,55 idles.was running fine but the left hand side carb has started running  to rich.It pops and bangs on that side ( running cannons).if I wind out the mixture screw more than half a turn it chucks out loads of black smoke and runs really rough.Mixture screw on the other carb is screwed out nearly one and a half turns.Any thoughts on this greatly received.Have stripped carb down and cleaned out but still the same.Even with the mix screw only half way out it doesn't run as it did.
Roy
Ps.carbs are only a few months old

14
Beach Buggy Body and Chassis Help / Att.of Snoopy
« on: July 11, 2019, 07:37:25 PM »
Hi Keith.Was wondering if you had a problem getting the bonnet on your Beam buggy to be a good fit.Struggling with mine at the mo.Big gaps down the sides.
Cheers
Roy

15
Beach Buggy Engine and Exhaust Help / Oil pressure gauges
« on: July 11, 2019, 07:34:11 PM »
Hi guys,been looking for an oil pressure gauge with sender.Now some senders have a 1/8" Npt thread some have a m10 thread.Whats the difference? And what one do I need for my buggy engine.
Cheers
Roy

Pages: [1] 2 3