Welcome, Guest. Please login or register.
March 04, 2021, 06:00:19 AM

Show Posts - pepsi81

Welcome to Beach Buggy .Info - The UK's Online Beach Buggy Community.

Show Posts

You can view here all posts made by this member. Note that you can only see posts made in areas to which you currently have access.


Messages - pepsi81

Pages: [1] 2 3 ... 93
1
Beach Buggy Rolling Chassis Help / Re: Wheel suppliers
« on: March 03, 2021, 01:46:33 AM »

Come on Paul.

Get a grip  ;D

Paul ;-)(-;

2
Beach Buggy IVA / SVA Help / Re: saloon on log book
« on: February 22, 2021, 09:56:09 PM »

My advice is see the forum (Dave DND thread) re: registering your buggy. Don’t pray around trying to avoid no MOT, etc Just be safe .

3
Beach Buggy Electrical Help / Re: Quality wire for buggy build
« on: February 22, 2021, 09:52:28 PM »
RS are a supplier for us. Standard is good, price isn’t. I’d go with Chad’s recommendation.
 ;-)up
Paul

4
Beach Buggy Body and Chassis Help / Re: Brakes and steering
« on: February 22, 2021, 09:47:04 PM »

Get her doing press-ups and curls. Far cheaper, more stratifying. She’s fiitter and will enjoy  ;D ;D :-\ ;-)(-;

5
Beach Buggy General Help / Re: NOVA
« on: February 13, 2021, 04:31:17 PM »
 Notification of Vehicle Arrival (NOVA)

From 15 April 2013, new or used land vehicles brought permanently into the UK from abroad must be notified to HMRC within 14 days of arrival and any VAT due paid or ‘secured’. A new online system called Notification of Vehicle Arrivals (NOVA) supports this change.

Paul 👍

6
Beach Buggy General Help / Re: Unleaded petrol
« on: February 11, 2021, 09:12:32 PM »

Speak for yourself  ;D :D ;-)up

7
VW Parts For Sale / Re: the yard/garages need to be cleared 2021 sale
« on: February 09, 2021, 09:26:22 PM »

Pete,

Looking for tin ware. Doghouse fan housing and cylinder tin . Plan to get powder coated .
What do you  have.
Best Paul

8
Members Buggies / Re: Prowler - Corvair (under construction
« on: February 03, 2021, 01:54:30 AM »
Joh,
Looks fab.Well thoughht out induction system.
Out of interest,what about crankcanse breathing 🤷🏻‍♂️😂
Paul

9
Members Buggies / Re: BIRTH OF A BUGGY CONTINUED
« on: January 25, 2021, 04:04:26 PM »

Spot on Paul. Very similar to mine. Top notch quality. Mike is the man ;-)up

Oaul

10
Beach Buggy Engine and Exhaust Help / Re: Venting to carbs
« on: January 14, 2021, 10:47:14 PM »

Think I can manage AN 10 hose/ fittings ( > 1/2 “ internal diameter) . Bigger hose better venting ?
Pauk

11
Beach Buggy Engine and Exhaust Help / Re: Venting to carbs
« on: January 14, 2021, 01:29:54 PM »
Good write up Paul. All your comments back a lot of sense.
I intend to trial various options  ;-)up

12
Beach Buggy Engine and Exhaust Help / Re: Venting to carbs
« on: January 13, 2021, 11:16:45 PM »

Appreciate your input Dave. Still don’t like the thought of putting unnecessaries into the carbs.
Think it’s a learning curve. Hopefully not expensive.

Best Paul

13
Beach Buggy Engine and Exhaust Help / Re: Venting to carbs
« on: January 13, 2021, 10:37:07 PM »

Ok. Understand. Thanks .
More space for air to move without challenging the crankcase 👍🤷🏻‍♂️.
Am I right re: oil level. Low becomes the new high  :-\ :-\
Paul

14
Beach Buggy Engine and Exhaust Help / Re: Venting to carbs
« on: January 13, 2021, 09:40:36 PM »

My breather is AN8 too, all mine are from Speedflow, yes Torques UK are cheaper.
Do you run a deep sump. Need to understand. The deep sump is footed via the 6mm bolts of the original mesh filter. So, you don’t bother the oil take off, leave as is 🤷🏻‍♂️ Re: dipstick level, the low mark becomes the high👍🤔
Not magic beans, makes perfect sense to me.
Flags, really appreciate your input.
Paul

15
Beach Buggy Engine and Exhaust Help / Re: Venting to carbs
« on: January 13, 2021, 09:14:18 PM »

Flags,

One more question. I can see the hose over the fan housing 👍Looks like you too use AN fittings. What size AN/ hose for your vent.
Thanks again.
Paul

Pages: [1] 2 3 ... 93