Britool Torque Multiplier

[Scottishbugger]

Just putting the feelers out to gauge interest for now. Last week i was helping my Dad clear out all his tools from his boat. I found a Britool torque multiplier in an old rusty Britool box. The actual tool itself looks to be in good condition, and from memory the torque ratio was 5.1. I have yet to try the tool, and need to take it into work to check it on our calibrated torque checking tool. I think it is 3/4" drive with a step down to 1/2" drive, but would need to double check this.

Would there be anyone out there interested in this, and does anyone have a guide price for it, providing it works ok once i check it?

Cheers

Richie

[snoopy]

They are silly money new selling at 10% of new price you are in the £100 region.

[Zip Buggy]

They are silly money new selling at 10% of new price you are in the £100 region.

What Snoopy meant to say was the £10 region - will that include postage?

[cunningstunt]

They are silly money new selling at 10% of new price you are in the £100 region.

What Snoopy meant to say was the £10 region - will that include postage?

£10 including postage? Get real. https://www.zoro.co.uk/shop/hand-tools/torque-multipliers/5%3A1-torque-multiplier-max-torque-2700-nm/p/ZT1008130X?utm_source=google&utm_campaign=pla%2B%7C%2BHand%20Tools&utm_term=ZT1008130X&utm_medium=pla_css_3&targetid=pla-394186358544&loc_physical_ms=1006544&dev=c&gclid=EAIaIQobChMI9e6qgqXa7QIVx57tCh1wbAbyEAQYASABEgLTUvD_BwE

£100 plus postage is a realistic price.

[Zip Buggy]

They are silly money new selling at 10% of new price you are in the £100 region.

What Snoopy meant to say was the £10 region - will that include postage?

£10 including postage? Get real. https://www.zoro.co.uk/shop/hand-tools/torque-multipliers/5%3A1-torque-multiplier-max-torque-2700-nm/p/ZT1008130X?utm_source=google&utm_campaign=pla%2B%7C%2BHand%20Tools&utm_term=ZT1008130X&utm_medium=pla_css_3&targetid=pla-394186358544&loc_physical_ms=1006544&dev=c&gclid=EAIaIQobChMI9e6qgqXa7QIVx57tCh1wbAbyEAQYASABEgLTUvD_BwE

£100 plus postage is a realistic price.

Calmez vous. Obviously said tongue in cheek.

[snoopy]

the kennedy is cheap compared to a britool one. just wondering if britool are made here or Taiwan, luckily my britool stuff is all 1970’s quality. Torque multipliers need the occasional check for calibration as it is easy to over tighten stuff. But for £10 I will offer to pay tracked
postage as well

[Paul1953]

Work in foot lbs and all you need is a decent 3\4" drive torque wrench and a length of pipe. Plus a bit of maths even I could compute and have done   

Sadly something is literally only worth what someone is willing to pay...

[Zip Buggy]

the kennedy is cheap compared to a britool one. just wondering if britool are made here or Taiwan, luckily my britool stuff is all 1970’s quality. Torque multipliers need the occasional check for calibration as it is easy to over tighten stuff. But for £10 I will offer to pay tracked
postage as well

Now your talking 

[Scottishbugger]

I've not had a chance to check it yet, but will try and do it tomorrow. Nice try but £10 aint going to get it. 

[Dave DND]

Nice try but £10 aint going to get it. 

And if it did, then ADMIN would get first dibs