Welcome, Guest. Please login or register.
April 20, 2021, 11:56:50 PM

Torque converter drive plate

This is a discussion for the topic Torque converter drive plate on the board Parts Wanted.

Author Topic: Torque converter drive plate  (Read 535 times)

this user is offline dustrat

  • Jr. Member
  • *
  • Posts: 12
on: September 22, 2020, 11:05:05 PM
I am converting an amputee friend of mine VW type 2 camper to stick shift automatic gearbox and looking for Torque Converter Drive Plate and the special size 36mm gland nut that would normally attach flywheel to crankshaft. Anyone had fitted a Stick Shift gearbox and gone back to manual got these parts lying about. Robert


this user is offline IDA

  • Buggy Baron
  • ****
  • Posts: 403
  • CHICHESTER
  • Mk2 Rat and LDV
Reply #1 on: September 22, 2020, 11:51:49 PM
 ebay and there is a group on Facebook... If fitting the auto stick in a bay it will not?? last long and is why vw put the full auto 003 in the type 3 and the 003-010 in the bays and 010 in T25 ..I got slipping with a 1600cc turbo in a bug put 2 boxs etc in all the same and is why I'm fitting a 003 set up in my Buggy..
Do not be offended by my spelling mistakes! Why asking tech? questions" as So far I have not asked Any?


this user is offline dustrat

  • Jr. Member
  • *
  • Posts: 12
Reply #2 on: September 23, 2020, 04:53:55 PM
Whats the name of group on Facebook please.


this user is offline IDA

  • Buggy Baron
  • ****
  • Posts: 403
  • CHICHESTER
  • Mk2 Rat and LDV
Reply #3 on: September 23, 2020, 05:03:39 PM
AutoStick Volks
Do not be offended by my spelling mistakes! Why asking tech? questions" as So far I have not asked Any?


this user is offline dustrat

  • Jr. Member
  • *
  • Posts: 12
Reply #4 on: October 22, 2020, 07:43:41 PM
Thanks for info. Managed to get one from member of Stickshift forum. Robert