Author Topic: Doghouse tinware (Read 438 times)

Buggybaggy · **on:** January 14, 2020, 03:37:34 PM

I don't have the bolt on bits of the doghouse on the rear of my fanshroud.
I've never thought of it as being an issue on a buggy engine.
What do you all think?

Roadrunner · **Reply #1 on:** January 14, 2020, 05:13:23 PM

In the normal hot/cold zone setup in a beetle then it is a necessity, but with a buggy and the non enclosed engine, the output from oil cooler is going to get blasted out the side.

Dave DND · **Reply #2 on:** January 14, 2020, 05:35:48 PM

Cannot really disagree with Gordon's thoughts there, but for peace of mind I would find them and fit them

snoopy · **Reply #3 on:** January 14, 2020, 05:57:14 PM

The cooler will vent to the left into the turbulence so ok but fitting all the parts is up to personal preference as you may want more parts to paint orange.

farmer rob · **Reply #4 on:** January 14, 2020, 07:34:14 PM

Personally, I wouldn't fit them, they are not needed on an all exposed engine for any cooling properties. However, with them removed, I suppose there is a very very very slim chance of a stone getting flung up and puncturing it

Rob

Buggybaggy · **Reply #5 on:** January 14, 2020, 07:54:35 PM

Right folks, not bothering it is then. Thanks.

Welcome, Guest. Please login or register.

August 15, 2020, 09:40:07 PM

Doghouse tinware