Welcome, Guest. Please login or register.
December 15, 2019, 05:55:50 PM

CB performance Hex bar linkage for t1,t2 and DRLA/IDF carb's

This is a discussion for the topic CB performance Hex bar linkage for t1,t2 and DRLA/IDF carb's on the board Parts Wanted.

Author Topic: CB performance Hex bar linkage for t1,t2 and DRLA/IDF carb's  (Read 221 times)

this user is offline farmer rob

  • Buggy Meister
  • ***
  • Posts: 1556
  • northants
  • SWB Rat
Hi Guy's, anyone got a CB performance Hex bar linkage for sale? I have bought an engine which has the carb's, filters, cast filter houses and drop links. So I need the Hex Bar and the 3 arms. Or does someone know where I could buy a new one from, so far I have only found complete kits.

Cheers Rob


this user is offline Dave DND

  • Global Moderator
  • Buggy Fanatic
  • ******
  • Posts: 9523
  • Paignton, Devon
  • Hustler GT
    • DND Services Ltd
01803-391680
dave@dndservices.co.uk



this user is offline farmer rob

  • Buggy Meister
  • ***
  • Posts: 1556
  • northants
  • SWB Rat
Reply #2 on: November 23, 2019, 11:33:30 AM
Cheers Dave, they sell the bare hex bar and all the other linkages but I need the arms that the throttle cable and drop linkages fasten too

Rob


this user is offline Zip Buggy

  • Buggy Meister
  • **
  • Posts: 1331
  • Bourne, Lincs
  • FF Buggy LWB
    • Zip Buddy
Reply #3 on: November 23, 2019, 12:42:19 PM
I do believe I have what you need Rob.
Who needs prozac when you can drive a buggy?


this user is offline farmer rob

  • Buggy Meister
  • ***
  • Posts: 1556
  • northants
  • SWB Rat
Reply #4 on: November 23, 2019, 03:46:44 PM
That sounds good :D Most of the hex bar linkage's are like this one in the photo but the CB performance ones have the ball ended bolts in the air filter castings, unlike this one, which has the ball ended bolts in the hex bar itself



So I need the hex bar with the arms on as shown in the photo but a CB one  ;-)up

Here is hoping, Rob


this user is online Buggybaggy

  • Edit Enabled
  • Buggy Veteran
  • ***
  • Posts: 2108
  • Leeds
  • Mk2 Volksrod
Reply #5 on: November 23, 2019, 10:16:29 PM
Can't help out with the linkage, but just wondering if it's for an engine you're putting together to sell. I need to get one for my buggy, or get one built/re-built.


this user is offline Zip Buggy

  • Buggy Meister
  • **
  • Posts: 1331
  • Bourne, Lincs
  • FF Buggy LWB
    • Zip Buddy
Reply #6 on: November 23, 2019, 11:49:05 PM
Rob, it's the one I took off my buggy when I fitted the bellcrank. The air-filter castings had a vertical arm with a threaded hole and the ball bit stuck out from there. I've removed that bit from the casting but have the hex bar with all three arms. The hex bar has a recess in each end but I don't have springs and cups if there are meant to be any in there.
Any good to you?
Who needs prozac when you can drive a buggy?


this user is offline farmer rob

  • Buggy Meister
  • ***
  • Posts: 1556
  • northants
  • SWB Rat
Reply #7 on: November 24, 2019, 11:35:39 AM
Hi Mark, they sound good to me. Let me know how much you want for them and how to pay you. Are you still on the same phone number

Cheers Rob


this user is offline farmer rob

  • Buggy Meister
  • ***
  • Posts: 1556
  • northants
  • SWB Rat
Reply #8 on: December 02, 2019, 02:03:55 PM
Sorted, thanks to Zip Buggy ;-)up

Rob


this user is offline Zip Buggy

  • Buggy Meister
  • **
  • Posts: 1331
  • Bourne, Lincs
  • FF Buggy LWB
    • Zip Buddy
Reply #9 on: December 02, 2019, 04:04:02 PM
Sorted, thanks to Zip Buggy ;-)up

Rob

Always nice to be able to help you out back Rob :D
Who needs prozac when you can drive a buggy?