Welcome, Guest. Please login or register.
June 20, 2019, 04:32:42 PM

Engine tin needed

This is a discussion for the topic Engine tin needed on the board Parts Wanted.

Author Topic: Engine tin needed  (Read 295 times)

this user is offline Marsdenmoor

  • Full Member
  • **
  • Posts: 56
on: April 16, 2019, 01:51:50 PM
Anyone got any serviceable engine tin going spare before I buy aftermarket. I need a couple of bits. Small sled piece (undertin) and the small sort of rectangular piece. They are going for blasting and powder coating .
Cheers


this user is offline Paul1953

  • Buggy Meister
  • ***
  • Posts: 1513
  • Newton Aycliffe, Co Durham
  • MANX SWB
Reply #1 on: April 16, 2019, 03:52:13 PM
Just a heads up here  ;-)up   If you end up going for aftermarket tin.... trial fit it first and only send for powder coating after you are sure it fits as you want it to.  :'(


this user is offline Bealzebug01

  • Jr. Member
  • *
  • Posts: 26
  • Lichfield, Staffs
  • Prowler
Reply #2 on: April 16, 2019, 04:40:37 PM
Hi Marsdenmoor

Where are you? I should have the bits you are after, as just taken an engine out of a bug, twin hotspot twin carb with dog house.
If you can send me some pics of the bits Iíll check. You are welcome to them for as I wonít be using them

Cheers
Matt


this user is offline Marsdenmoor

  • Full Member
  • **
  • Posts: 56
Reply #3 on: April 16, 2019, 07:15:53 PM
Wow thatís fantastic, let me know how much you want for them. Iíll try attach pics of the bits.
Iím in Huddersfield but if your miles away I donít mind sorting a courier to collect.
Thankyou
GrAham


this user is offline Marsdenmoor

  • Full Member
  • **
  • Posts: 56
Reply #4 on: April 16, 2019, 07:16:53 PM
Not sure how to attach. Can I send them via email?


this user is offline Bealzebug01

  • Jr. Member
  • *
  • Posts: 26
  • Lichfield, Staffs
  • Prowler
Reply #5 on: April 17, 2019, 06:31:47 AM
Sent you a pm


this user is offline Marsdenmoor

  • Full Member
  • **
  • Posts: 56
Reply #6 on: April 18, 2019, 09:16:24 AM
Sent you a pm

Hi, did you get the pics? If you are wanting shut of all the tinware off that engine, might Be tempted to buy the lot in case mine doesnít survive the blasting!

Cheers
Graham


this user is offline Bealzebug01

  • Jr. Member
  • *
  • Posts: 26
  • Lichfield, Staffs
  • Prowler
Reply #7 on: April 18, 2019, 09:02:05 PM
Hi graham, got the pics Iím in the garage in the morning so Iíll take a look and send back some pics
Cheers
Matt


this user is offline Marsdenmoor

  • Full Member
  • **
  • Posts: 56
Reply #8 on: April 18, 2019, 09:21:49 PM
Thankyou really appreciate it!


this user is offline Marsdenmoor

  • Full Member
  • **
  • Posts: 56
Reply #9 on: April 20, 2019, 07:13:38 PM
Any luck?


this user is offline Bealzebug01

  • Jr. Member
  • *
  • Posts: 26
  • Lichfield, Staffs
  • Prowler
Reply #10 on: April 21, 2019, 07:58:34 AM
Iíve sent you an email