Welcome, Guest. Please login or register.
November 12, 2019, 06:28:04 PM

1964 Classic Manx Build

This is a discussion for the topic 1964 Classic Manx Build on the board Members Buggies.

Author Topic: 1964 Classic Manx Build  (Read 1495 times)

this user is offline Dave DND

  • Global Moderator
  • Buggy Fanatic
  • ******
  • Posts: 9481
  • Paignton, Devon
  • Hustler GT
    • DND Services Ltd
Reply #15 on: August 22, 2019, 02:45:59 PM
Looking good  ;-)up
01803-391680
dave@dndservices.co.uk



this user is offline Bealzebug01

  • Jr. Member
  • *
  • Posts: 37
  • Lichfield, Staffs
  • Prowler
Reply #16 on: August 23, 2019, 11:59:08 AM
Looks good. Not too sure from the photos how flat is the finish you obtained from the Raptor. What size tire and needle to you use and what psi did you spray at? Gun make and model?
Iím looking to use tintable raptor in tinted to act like tough clear coat on my pan and any info on finish would be really helpful
Cheers
Matt


this user is offline parmaynu

  • Buggy Veteran
  • **
  • Posts: 2079
  • Maidstone, Kent
  • Nuffin
    • Old Skool Parts Shop
Reply #17 on: August 23, 2019, 12:36:29 PM
I didnít spray it. It was a cheap hvlp gun with 2mm tip. The finish is very flat but a little rough. I will put another coat on to try and smooth it a little.
Old Skool Parts Shop

oldskoolpartsshop.com


this user is offline Bealzebug01

  • Jr. Member
  • *
  • Posts: 37
  • Lichfield, Staffs
  • Prowler
Reply #18 on: August 23, 2019, 01:37:48 PM
Thanks for the info. In regard to the second coat, Iím sure I read on Upols site that you are able to flat the first coat before applying second if you want to tidy things up.
Cheers
Matt