Welcome, Guest. Please login or register.
November 18, 2018, 09:05:59 AM

Bob cat exhaust 4 into 1 pipe

This is a discussion for the topic Bob cat exhaust 4 into 1 pipe on the board Parts Wanted.

Author Topic: Bob cat exhaust 4 into 1 pipe  (Read 405 times)

this user is offline Hugh

  • Buggy Veteran
  • **
  • Posts: 2082
  • North Herefordshire
  • Mantaray Mk II
on: July 11, 2018, 09:46:07 AM
Following Snoopy sniffing out the holes in my exhaust pipe I'd like to source another shiny 4 into 1 section to join the 4 exhaust pipes to the silencer.



Hugh


this user is offline Chad

  • MBC Moderator
  • Buggy Veteran
  • ******
  • Posts: 2176
  • Kempsey, Worcestershire
  • Doon SWB
    • Doon Buggies
Reply #1 on: July 11, 2018, 12:21:12 PM
Hugh,

I have an original tri-mill top piece. Is that what you are after?

Chad
The Classic Evovles
www.doon.co.uk


this user is offline snoopy

  • MBC Moderator
  • Buggy Fanatic
  • ******
  • Posts: 7242
  • evesham. 07757010432
  • Kango ss/ Jas lwb
Reply #2 on: July 11, 2018, 12:40:39 PM
Me sniffing out :-\ this is what you get from to much polishing  ;D


this user is offline Hugh

  • Buggy Veteran
  • **
  • Posts: 2082
  • North Herefordshire
  • Mantaray Mk II
Reply #3 on: July 11, 2018, 04:51:58 PM
Chad sounds interesting. I don't know what a Tri-Mill is but if it's the bit with 4 pipes merging to 1 pipe over about 14 inches and it's shiney then I'm v interested.

I'll ask my Evesham specialist exhaust fitter if a Tri-Mill is the answer.

Thanks.
Hugh


this user is offline snoopy

  • MBC Moderator
  • Buggy Fanatic
  • ******
  • Posts: 7242
  • evesham. 07757010432
  • Kango ss/ Jas lwb
Reply #4 on: July 11, 2018, 07:10:50 PM
a trimill has the silencer pointing down to the side using a bend not straight up central like your bobcat.


this user is offline Hugh

  • Buggy Veteran
  • **
  • Posts: 2082
  • North Herefordshire
  • Mantaray Mk II
Reply #5 on: July 11, 2018, 08:27:33 PM
Ah like Dave C.

Thanks Chad but I'd have to saw off the drooping bit and that would be a shame on a new item.

I'll keep looking for one that keeps the bob cat tail 'up'.
Hugh


this user is offline Chad

  • MBC Moderator
  • Buggy Veteran
  • ******
  • Posts: 2176
  • Kempsey, Worcestershire
  • Doon SWB
    • Doon Buggies
Reply #6 on: July 11, 2018, 09:41:23 PM
The original Tri-Mill was what the bobcat was modelled on.

It is the piece you are after as it matches your picture (my phone didn't show the picture).

The droopy down one came after.

Ill sort it out for you.

Chad
The Classic Evovles
www.doon.co.uk


this user is offline Hugh

  • Buggy Veteran
  • **
  • Posts: 2082
  • North Herefordshire
  • Mantaray Mk II
Reply #7 on: July 11, 2018, 09:50:21 PM
Thanks Chad.

I could buy a whole new bob cat exhaust system for £200/400 but donít think the rest of the system is in need of replacing.

Didnít think Iíd find the piece quite so easily and quickly....good old MBC.
Hugh